Robco Expert

Sizing Semi-Metallic Gaskets When Replacing Soft Gaskets When replacing soft gaskets with semi-metallic gaskets, it's important to understand the sizing differences and considerations. The following guidelines provide suggested dimensions based on experience to help you choose the appropriate non-metallic gasket size to replace a soft gasket. These sizings are not mandatory but serve as useful recommendations. 1. When Flange Dimensions Are Provided If the customer provides the dimensions of the flange, the following guidelines can be used to determine the appropriate gasket size: Gasket Inner Diameter (I.D.) : The inner diameter of the gasket should be the bore size of the flange plus a minimum of 1/8". Gasket Outer Diameter (O.D.) : The outer diameter can be up to the bolt hole circle diameter minus one bolt hole diameter. This applies when the proposed gasket width corresponds to the standard width of semi-metallic gaskets, which is typically 1/2", 3/4...